发布日期：2017-08-07 | 浏览次数： | 来源:admin
PVE52 Technical Specifications
General:
· External cylinder diameter: 52 11/16” (1,339mm)
· Rated Load: 525 lbs. (238 kg)
· Speed: 20 fpm (.10 ms)
· No pit required. Bottom level floor must be 100% level as elevator rests on existing floor.
· No hoistway required.
· Minimum overhead clearance:
o Standard Unit (turbine motors located on top): 107” (2,719mm)
o Split Unit (turbine motors located remotely): 97” (2,464mm)
· Penetration required to install through floors and ceilings: 54 11/16” (1,389mm)
Mechanical Requirements
· 220V, 60/50 Hz, 35amp single phase power supply
· 6 turbine motors located in pump box using a total of 6KW
Cabin:
· Entrance width opening: 32” (813mm)
· Internal cabin height: 79” (2007mm)
· Internal cabin diameter: 44” (1,118mm)
· Automatic LED lighting and cabin fan
· Door openings: same side (in-line) and walk through (180°).
o All doors are hinged on top left, with door swing to the left, from inside the cabin.
§ Door Height: 79 ¾ ” (2,026mm)
§ Height to top of Door closer: 81 ½” ( 2,071mm)
o Each landing level specified will include only one door.
· 24 Volt electrical circuits with all controls in cabin
· Push button call controls with precise leveling at each landing.
Safety:
· Automatic descent to ground level at safety speed in the event of a power failure.
· Mechanical emergency brakes within two inches of freefall in vacuum loss or catastrophic failure.
· Electromechanical interlocks at each landing
· Alarm system and telephone (optional)
Pneumatic Vacuum Elevators Technical Specifications Model PVE 52©2010
联系我们
CONTACT___US苏先生电话：4000158855
电话
地图
分享